Easy open end lid is used to seal the lid of canned food with a pull ring, and belongs to metal packaging products. Easy to pull lids are used for sealing and opening cans. They are defined as lids that are pre engraved with a certain depth of scratch line and riveted with a pull ring to safely tear open along the scratch line. It is a good anti-counterfeiting bottle cap. The general packaging form of milk powder cans adopts the form of easy open end lid. Below is a brief introduction to the production process of easy open end lid. 1. Delivery. Feed the formed basic cover into the Easy open end lid production equipment. The production process of the basic cover is the same as that of the metal can cover. The basic cover is stamped, with a countersunk degree, round edges of the can edge, and glue injection. 2. Punching. Punch out a hole in the middle of the formed basic cover, and punch the O-ring easy open end lid into a circular hole; Punch out D-shaped holes for D-shaped easy open end lid. 3. Curling. Roll the edge of the hole in the middle of the cover towards the outer diameter direction, with the curling direction towards the inner side of the basic cover, in order to ensure that there are no burrs or notches on the hole edge. 4. Seal aluminum foil. Glue the stamped aluminum foil onto the cover using a heat sealing method to seal the middle hole. 5. Embossing. Pressing patterns on aluminum foil is both aesthetically pleasing and increases the strength of the foil. 6. Testing and packaging. Conduct online testing on each easy open end lid to check its sealing performance. Products that pass the testing will be automatically packaged. BIOPIN easy open end lid meet the national food level safety. BIOPIN specializes in providing easy open end lid, aluminum easy open end lid, tinplate easy open end lid, beverage easy open end lid, etc.

Aluminum cans are a fantastic example of the benefits of recycling. Not only are they incredibly versatile in their uses, they are also 100% recyclable, meaning they can be used over and over again without losing their quality or value. Today, we will be taking a closer look at aluminum cans and discussing the importance of their recycling. Firstly, aluminum has a very low melting point, meaning that it can be easily melted down and reshaped into new products. Recycling aluminum cans uses 95% less energy than producing new aluminum, which not only saves energy but also reduces greenhouse gas emissions. Recycling is a crucial part of sustainability and everyday waste reduction efforts, and aluminum cans are a great way to start.   In addition to saving energy, recycling aluminum cans also helps to preserve natural resources. By recycling cans, we can reduce the need for new raw materials to be extracted and processed, such as bauxite ore. This reduces the amount of mining needed, which can have negative environmental impacts such as habitat destruction, pollution, and the destruction of ecological biodiversity. Finally, recycling aluminum cans is cost-effective. When recycled, the aluminum can be sold back to manufacturers for a profit. This means that recycling aluminum cans not only reduces your carbon footprint and helps protect the environment, but it can also generate an additional income stream for recycling facilities.   In conclusion, aluminum cans are a valuable resource that can be easily and effectively recycled. By recycling aluminum cans, we not only reduce the amount of energy used to produce new cans, we also help to preserve natural resources and protect the environment. So next time you finish a soda or beer, remember to recycle the can and make a difference for the planet.

Canned food or beverages are very common in the market, and most of these cans are made of aluminum or tinplate. The manufacturing cost of aluminum is relatively low, and its ductility is relatively good, so it is also more convenient in the manufacture of cans.   Aluminum cans have always been at the forefront of packaging design, they are lightweight and easy to recycle. Easy to open. The lid is a pull-tab easy-open lid. When the tab is lifted, the rivet drives the pear-shaped notch, and the liquid inside can be sucked out or poured out through the orifice, which is simple and safe. Easy and high-speed filling. The advantages of aluminum cans are also reflected in portability. Aluminum cans are lightweight, high temperature resistant, drop resistant, and easier to carry than glass bottles. Of course, it also has an excellent cold steam type. The tube wall is thin, about 1/3 of the thickness of the thin aluminum plate, and has excellent thermal conductivity. Freezing and reheating are fast and well adapted to consumer requirements. No side seam welds. The cost of this product is very low. The aluminum can adopts the necking process and the thinning and stretching process, and uses less material, saving 3%-5% than the three-piece can, and due to mass production, the cost is lower. Of course, the can body printing of aluminum cans is easier to make a good texture than the label of plastic bottle body. And during production, it can be autoclaved if used. No matter what production process is used, the shelf life of aluminum cans cannot reach such a long period. Therefore, when the product chooses a long shelf life, it can only be packaged in aluminum cans.   Aluminum cans can withstand drops, and are widely used in medical, powder and other fields with their unique advantages to ensure the airtightness and safety of medicines. In terms of environmental protection and safety, aluminum cans are often used in food packaging, pharmaceutical packaging and other fields, and their safety and environmental protection performance is an important factor to ensure the safety and hygiene of packaged items.